Installation Manual

Multifunction Electronic Modules - Body Control Module (BCM)
Print Report An Error
Removal and Installation
General Equipment
Ford Diagnostic Equipment
Removal
1. NOTICE: Modules are not interchangeable between vehicles.
NOTE: This step is only necessary when installing a new component.
Download the module information to the diagnostic tool using the Programmable Modules
Installation routine.
Use the General Equipment: Ford Diagnostic Equipment
2. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General
Procedures).
3.
4.
Page 1 of 2
Print
28.11.2019
http://www.etis.ford.com/workShopManuals.do