Manualshelf

Installation Manual

ManualsBrandsLear Automotive Spain ManualsElectronicsRemote Keyless Entry System operating at 315MHz (receiver only)
123
Installation
1. To install, reverse the removal procedure.
2. NOTICE: Refer to the Wiring Diagram to ensure that only fuses with the correct
ampere ratings are used.
• Compare the previous and the new unit fuses for number, position and ampere
ratings.
• Transfer missing fuses to the new unit.
3. NOTE: This step is only necessary when installing a new component.
Upload the module information from the diagnostic tool to the module using the
Programmable Modules Installation routine.
Use the General Equipment: Ford Diagnostic Equipment
Page 2 of 2
Print
28.11.2019
http://www.etis.ford.com/workShopManuals.do