User Guide

Inflation Instructions
1. The inflatable globe must reach room
temperature before inflation to reduce
harmful temperature shock.
2. For best results, inflate by blowing into the
valve with your mouth.
3. Do not over-inflate. Do not attempt to
remove every wrinkle from the piece.
4. After inflating, cover the valve opening with
your finger. Pinch the valve at its base with
your fingers and insert the plug into the
valve opening. Press the valve into the
piece until the valve is flat with the surface
of the object.
Do not inflate with an air
compressor or any other high-pressure hose.
Do not pull on valves. Do not wet. THIS IS
NOT A LIFESAVING DEVICE.
Maintenance and Deflation
1. Do not drag over sharp objects or surfaces.
2. Avoid contact with hot or sharp objects.
3. To clean, wipe with a damp cloth and let air
dry. Do not immerse in water.
4. If globe needs repair, please follow the
directions in the repair kit.
To operate the light feature, press in the button
on the bottom of the globe. To conserve
battery and bulb life, turn off the light feature
after each use by pressing in the button again.
Light feature is best viewed in a room with
minimal to no light.
To hang the globe, tie a piece of string to a
hang tab near the air-hole closure and attach
to the ceiling. Do not tie string too tightly as
hang tab may tear.