User manual

WaveAce 1000/2000
WA1K2K-OM-E RevB 15
Menu Control Buttons
 CURSORS - Press to turn on the cursors and display the Cursor
menu. You can use the Cursor menu to set the Cursor Mode
(Auto, Off, Manual, Track). When Cursors are on (CURSORS
button is lit), turn the Adjust knob to position the cursors. See
Measuring with Cursors (on page 45) for more information.
 ACQUIRE - Press to display Acquire menu. You can use the Acquire
menu to set the acquisition Sampling Mode (Sampling, Peak
Detect, Average). See Acquisition Types (on page 34) for more
information.
 SAVE/RECALL - Press to display the Save/Recall menu. You can
use the Save/Recall menu to save and recall up to 20 oscilloscope
setups or waveforms in internal memory (up to 20 waveforms) or
on a USB memory device (limited by memory capacity of USB
device). You can also use it to recall the default factory settings, to
save waveform data as a comma-delimited file (.CSV), and to save
or print the displayed waveform image. See Saving and Recalling
Oscilloscope Settings (on page 62) for more information.
 MEASURE - Press to display a menu of measurement parameters.
The Display Type must be set to YT mode. For more information
on measurement parameters, refer to Parameter Measurements
(on page 49).
 DISPLAY - Press to open the Display menu. You can use the
Display menu to set grid and waveform display styles, and
persistence. See Setting Up the Display (on page 21) for more
information.
 UTILITY - Press to open the Utility menu. You can use the Utility
menu to configure WaveAce features, such as sound, language,
counter, etc. You can also view system status and update
software. See Utility Menu (on page 79) for more information.