User manual

Operator's Manual
24 WA1K2K-OM-E RevB
 When a USB Memory Device is not inserted in the USB Port
the area is blank.
 USB Memory Device is inserted in the USB Port (as
shown previous).
 When plugging in or removing a USB Memory Device, a
message is briefly shown on the grid display as USB Flash
Drive Plug In! and USB Flash Drive Pull Out!, respectively.
3. Waveform Preview Display - This small portion at the top of the
screen shows how much of the captured waveform is currently
appearing on the display.
Note: Show the full waveform by stopping the trigger and turning the
Time/Div button to the left (increasing the amount of time shown on
the display).
4. Print Key - Indicates whether the Print Key option is set to Print
Picture or Save Picture.
 Print Key option set to Save Picture (as shown previous).
 Print Key option set to Print Picture
5. Back USB - Indicates whether the Back USB option is set to
Computer or Printer.
 Back USB option set to Computer (as shown previous).
 Back USB option set to Printer
6. Horizontal Trigger Position Marker - Shows the horizontal trigger
position.
7. Display Markers (Zero Volts Level) - Show the ground reference
points of the displayed waveforms. If there is no marker, the
channel is not displayed.
8. Display Signal Source
9. Signal Coupling symbol
10. Volts/Division
11. Indicates whether the bandwidth limiting filter is On or Off. The B
icon indicates the filter is On.
12. Main timebase setting (a Window timebase setting is also
displayed when applicable).
13. Trigger Source