User manual
Table Of Contents
WaveAce 1000/2000
WA1K2K-OM-E RevB 25
14. Frequency Counter of Trigger Signal
15. Trigger type and level indicator
16. Horizontal Trigger Position Readout - Displays the waveform's
horizontal position in time (seconds).
Auto Setup
The Auto Setup function identifies the waveform type and automatically
adjusts controls to produce a usable input signal display.
Four Auto Setup waveform options are available: Multi-Cycle, Single-
Cycle, Rising Edge, and Falling Edge.
Press the AUTO front panel button, and then press the menu option
button adjacent to the desired waveform as follows:
Note: Use the bottom waveform menu button to Undo an applied Auto Setup.