User manual

Operator's Manual
32 WA1K2K-OM-E RevB
3. Press the Filter option button on page 2/3. The Filter menu opens.
4. Press the Filter option button and select On.
5. Press the Type option button and select a digital filter type.
6. Press the Upp. Limit option button and turn the Adjust front panel
knob to set the Upper limit.
7. Press the Low. Limit option button and turn the Adjust front panel
knob to set the Lower limit.
Note: If you select the Low Pass Filter (LPF) type, you can only set an Upper
Limit. If you select the High Pass Filter (HPF) type, you can only set a Lower
Limit. For both Band Pass Filter (BPF) and Band Stop Filter, you can set both
Upper and Lower Limits.
Unit and Skew Settings
On the channel menu, press the Next Page option button, showing page
3/3. This menu allows you to set your desired Unit and Skew values.