User manual

Operator's Manual
48 WA1K2K-OM-E RevB
A→T - the horizontal position of Cursor A (Time cursor centered
around the midpoint of the screen)
A→V - the vertical position of Cursor A (Voltage cursor centered
on the channel ground level)
B→T - the horizontal position of Cursor B (Time cursor centered on
the midpoint of the screen)
B→V - the vertical position of Cursor B (Voltage cursor centered
around the channel ground level)
▲T - Horizontal space between Cursor A and Cursor B (Time value
between the two cursors)
1/▲T - the reciprocal of the horizontal space between Cursor A and
Cursor B
▲V - the vertical space between Cursor A and Cursor B (Voltage
value between the two cursors)
Cursor Placement
1. Press the CURSORS front panel button. The Cursor menu opens.
2. Now, cursor placement depends on the cursor measurement
Mode selected - Manual, Track, or Auto - in the following manner:
Manual
Set the mode to Manual by pressing the Mode option button until
Manual is selected. Press the Type option button and select