User manual

WaveAce 1000/2000
WA1K2K-OM-E RevB 53
after left cursor, period is measured for each transition pair, with
values averaged to give final result.
 +Wid - Time between the first rising edge and the next
rising edge at the waveform 50% level.
 -Wid - Time between the first falling edge and the next
rising edge at the waveform 50% level.
 Rise Time - Duration of pulse waveform's rising transition
from 10% to 90%, averaged for all rising transitions between the
cursors.
 Fall Time - Duration of pulse waveform's falling transition
from 90% to 10%, averaged for all falling transitions between the
cursors.
 BWid - Duration of a burst measured over the entire
waveform.
 +Dut - Ratio between positive pulse width and period.
 -Dut - Ratio between negative pulse width and period.
Delay Measurement Parameters
First select a Source Channel for your Delay measurement parameter by
pressing the Source option button. Now, use the Type option button to
choose from the following Delay measurement parameters for your
selected source.