User manual

Operator's Manual
62 WA1K2K-OM-E RevB
Save and Recall
Saving and Recalling Oscilloscope Settings
You can quickly save and recall up to 20 oscilloscope panel settings and
20 waveforms in internal memory. Waveforms and panel settings can
also be saved to a USB memory device.
Saving the Current Settings
1. Press the Save/Recall front panel button. The SAVE/REC menu is
shown.
2. Press the Type option button and select Setups.
3. Save your setup either to Device (meaning internal memory on
your WaveAce) or File (for storage on a USB memory device)
using the following methods.
Saving Setups to Internal Memory
 Press the Save To option button to select Device.
 Press the Setup... option button or turn the Adjust front
panel knob and assign a number (No. 1 - No. 20) to the
setup.
 Press the Save option button to save the current setup.
 The setup is saved to memory and the oscilloscope briefly
shows a Store Data Success! message on the lower part of
the grid display area.
Saving Setups to a USB Memory Device