User manual

WaveAce 1000/2000
WA1K2K-OM-E RevB 91
After downloading, open the .zip file on your computer. The .zip should
contain an .ads file and the Firmware Update Procedure .pdf file.
Move the .ads file to a USB memory device.
The system software update .ads file is then loaded through the USB
memory port on the front of the oscilloscope.
1. Insert the USB memory device containing the software update in
the USB port on the front of the oscilloscope.
2. Press the front panel Utility button.
3. Press the Next Page menu option button to navigate to menu
page 3/4. Select the Update Firmware menu option button. The
Update Firmware screen is shown.
Note: Verify the firmware product type matches your instrument. Also,
verify the firmware update file is stored in the root directory of the
USB memory device.