Installation Guide

Installation

LectraLock outlet protectors install just like ordinary

electrical outlet plates – it’s as simple as that!

Standard Style Installation:

TO INSTALL:

Remove and discard your existing electrical outlet plate.

Replace the old plate with the LectraLock® unit, being sure to use the screw(s) provided.

TO OPERATE:

1. Grasp clear cover by sidewalls

2. Squeeze side marked "Press"

3. Latching tab releases and the cover can swing open or closed.

IMPORTANT NOTES FOR CHILD SAFETY AND PROPER PRODUCT USE: Every

effort has been made to make the LectraLock Electrical Outlet Protector as tamper-resistant as

possible. However, this product is not intended to replace adult supervision.

Please install unit with screw(s) provided. If unit is to be mounted horizontally, cord exit-holes

should face up to prevent children from effectively applying body weight to the latching tab.

THIS DEVICE IS INTENDED FOR INDOOR USE ONLY.

Flat Style Installation:

TO INSTALL:

PAGE 1
Installation LectraLock outlet protectors install just like ordinary electrical outlet plates – it’s as simple as that! Standard Style Installation: TO INSTALL: Remove and discard your existing electrical outlet plate. Replace the old plate with the LectraLock® unit, being sure to use the screw(s) provided. TO OPERATE: 1. Grasp clear cover by sidewalls 2. Squeeze side marked "Press" 3. Latching tab releases and the cover can swing open or closed.
PAGE 2
Remove and discard your existing electrical outlet plate. Replace the old plate with the LectraLock® unit, being sure to use the screw(s) provided. TO OPERATE: 1. To close: Insert the double-tabbed side of the cover into the slots on the baseplate. Press the notched area on the opposite side of the cover inward until the latching tab snaps into place. 2.