Specification

Baseplate - LDM1
Weight: .079 lbs.
Mat. Volume: 1.778 in3
Projected Area: 12.57 in2
Cover - LDM7
Weight: .033lbs.
Mat. Volume: 0.773 in3
Projected Area: 10.658 in2
Total Unit weight (including screw) .115 lbs.
Model: LDM1-7
Single-Gang Duplex
Flat Cover - Mid-Size Baseplate
Maximum inside cover dimensions:
2.36"W X 4.12"H X 0.19"D
Cover
BasePlate
©Copyright 2011, LectraLock®. All rights reserved
3.14
4.88
0.19
Inside
Cover Depth
0.47
(All dimensions in inches)
The LDM1-7 model fits all standard duplex
electrical outlets. The baseplate is mid-sized,
allowing for cover-up of wall imperfections
around the receptacle. The flat cover is intended to
prevent the outlet from being used. Although the
cover snaps into place by hand, a tool (such as
a screwdriver) is required to remove it.
This device offers a semi-permanent means of
removing outlets from use without actually
removing the wiring or receptacle as is required
with a standard blanking plate.
Baseplate and cover are 100% LEXAN
(940A Polycarbonate)