Specification

Cover
BasePlate
4.95
4.88
0.47
0.19
Inside
Cover Depth
Baseplate - LDM15
Weight: .101 lbs.
Mat. Volume: 2.345 in3
Projected Area: 17.105 in2
Cover - LDM17
Weight: .055 lbs.
Mat. Volume: 1.270 in3
Projected Area: 18.341 in2
Total Unit weight (including screws) .163 lbs.
Maximum inside
cover dimensions:
4.18"W X 4.12"H X 0.19"D
Model: LDM15-17
Double-Gang Decorator (also fits GFI)
Flat Cover - Mid-Size Baseplate
The LDM15-17 model fits all standard decorator type
electrical outlets. The baseplate is mid-sized,
allowing for cover-up of wall imperfections
around the receptacle. The flat cover is intended to
prevent the outlet from being used. Although the
cover snaps into place by hand, a tool (such as
a screwdriver) is required to remove it.
This device offers a semi-permanent means of
removing outlets from use without actually
removing the wiring or receptacle as is required
with a standard blanking plate.
(All dimensions in inches)
©Copyright 2011, LectraLock®. All rights reserved
Baseplate and Cover are 100% LEXAN
(940A Polycarbonate)