Lectron 32A Level 2 EV Charger USER MANUAL
In the Box 1 x portable electric vehicle charger Safety Information 1. It is recommended that electrical outlets for your charger should be installed by a licensed and qualified electrician. To avoid serious injury or death, the installation must comply with the provisions of the National Electric Code (NEC) and all local codes. In cases of any conflict between the local codes and the NEC, local codes shall take precedence. 2. This product must be grounded.
5. When using your charger, basic precautions should always be followed, including the following: • Read warnings on the charger cord label before operating the charger for the first time. Read all instructions in this guide before using this charger. • Never use the charger with an extension cord. • Never use the charger with any AC adapter. • Shock hazard – make sure the plug is fully inserted into the wall outlet so that there are no exposed blade surfaces.
How to Use Note: Ensure the car is parked and the engine is turned off. 1. Plug into the socket. 2. Press the button to switch on the charging current. 32A 217.84V 0.
3. Plug the handle into your EV. 4. Charging begins automatically. While charging, the LED indicator will blink continuously. Verify the charging status by checking your vehicle dashboard.
5. When the vehicle is fully charged, the LED indicator light will stay solid. Fully Charged + 0 km 6/6 A 210 V 6. Disconnect the handle when the charging is complete by pressing the release button on the handle and removing it from the vehicle.
Specifications Input/output: Frequency: Maximum current: Cable length: Plug: EV connector: Dimensions: Weight: Operating temperature: 100 V - 250 V 50 / 60 Hz 32 A 16 ft (18 ft total reach) NEMA 14-50 SAE-J1772 16.5 X 13 X 5 in 9.9 lb -22°F to 122°F Get More Support Scan the QR code below or email us at contact@ev-lectron.com. For more information, visit: www.ev-lectron.
