User's Manual

4-channel Digital Wireless System
Rio Rancho, NM, USA
7
Transmitter Input Modes
The transmitter can be set up in three different con-
figurations with the AES3 mode menu for 4-channel
operation:
CH 1
CH 2
CH 3
CH 4
ANALOG
ANALOG
ANALOG
ANALOG
CH 1
CH 2
CH 3
CH 4
DIGITAL
DIGITAL
ANALOG
ANALOG
NOT USED
CH 1
CH 2
CH 3
CH 4
DIGITAL
DIGITAL
NOT USED
NOT USED
DIGITAL
DIGITAL
Two different configurations are available for 2-channel
operation:
CH 1
CH 2
CH 3
CH 4
ANALOG
ANALOG
CH 1
CH 2
CH 3
CH 4
DIGITAL
DIGITAL
NOT USED
NOT USED
NOT USED
NOT USED
NOT USED
Receiver Output Modes
The receiver audio outputs can be configured in the
same manner as the transmitter for 4-channel opera-
tion:
CH 1
CH 2
CH 3
CH 4
ANALOG
ANALOG
ANALOG
ANALOG
CH 1
CH 2
CH 3
CH 4
DIGITAL
DIGITAL
ANALOG
ANALOG
NOT USED
CH 1
CH 2
CH 3
CH 4
DIGITAL
DIGITAL
NOT USED
NOT USED
DIGITAL
DIGITAL
Two different configurations are available for 2-channel
operation:
CH 1
CH 2
CH 3
CH 4
DIGITAL
DIGITAL
NOT USED
CH 1
CH 2
CH 3
CH 4
NOT USED
NOT USED
ANALOG
ANALOG
NOT USED
NOT USED
Mixed Modes
The selected AES3 modes on the transmitter and re-
ceiver do not have to be identical. For example, analog
signals can be fed into the transmitter from a mixer or
wireless mic receivers, transmitted to the D4 receiver,
which can be configured for four digital outputs to feed
a digital recorder.
The sampling rate of the audio at the receiver digital
outputs will always be at 48 kHz, regardless of the
sampling rate of the signal fed into the transmitter.
NOTE: Transmitter and receiver must both be set
to either the 2-channel or 4-channel mode.
Navigating the LCD
Navigation through setup screens is the same on
transmitter and receiver. The Main Window will display
audio levels for all active channels while the system is
operating. Press the FUNC button to enter the setup
menu.
FUNC
BACK
OFF
ON
1
2
34
DIGITAL 4 CHANNEL TRANSMITTER
Then press the UP and DOWN arrow buttons to select
a menu item.
FUNC
BACK
OFF
ON
1
2
34
DIGITAL 4 CHANNEL TRANSMITTER
Press the FUNC button to enter the setup screen for
the selected item. Then use the UP and DOWN arrow
buttons to select a value or mode.
FUNC
BACK
OFF
ON
1
2
34
DIGITAL 4 CHANNEL TRANSMITTER
Press BACK once to return to the Menu or twice to
return to the Main Wiindow.