User's Manual

DPR-A
LECTROSONICS, INC.
14
Xmit Menu
Selecting Frequency
The setup screen for frequency selection offers two
ways to browse the available frequencies.
Xmit...
Freq.
TxPower
Rf On?
Freq.
494.500
Freq.
494.500
Press the MENU/SEL button to select each field. Use
the and arrow buttons to adjust the frequency.
Each field will step through the available frequencies in
a different increment.
Setting Transmitter Output Power
The output power can be set to 25 mW or 50 mW.
Xmit...
Freq.
TxPower
Rf On?
TxPower
25 mW
50 mW
Turning Rf Output On
It’s best to set frequency and other settings in the
standby mode (Rf off) so that no audio will enter the
sound system or recorder during adjustment. Use this
menu item to turn the Rf carrier on and off.
Xmit...
Freq.
TxPower
Rf On?
Rf On?
Ye s
No
NOTE: See previous section, Turning Power ON
and OFF for instructions on turning transmitter
on with the Rf carrier disabled (Standby Mode).
SDCard Menu
Record or Stop
Begins recording or stops recording. (See Recorder
Operating Instructions.)
SDCard...
Record
Files
Ta kes
SDCard...
Stop
Files
Ta kes
Choosing Files for Replay
Files
0004B
0001B
0002B
0001C
0002C
0003B
SDCard...
Record
Files
Ta kes
Select recorded
files on
microSDHC
memory card.
Choosing Takes for Replay
Use UP and DOWN arrows to toggle and MENU/SEL
to play back.
SDCard...
Record
Files
Ta kes
Ta kes
S01 T001
S01 T002
S02 T001
S03 T001
Setting Scene and Take Number
Use UP and DOWN arrows to advance Scene and
Take and MENU/SEL to toggle. Press the BACK but-
ton to return to menu.
Sc&Take
Scene 1
Ta ke 5
SDCard...
Files
Ta kes
Sc&Take
Formatting microSDHC Memory Card
Formats the microSDHC memory card.
WARNING: This function erases any content
on the microSDHC memory card.
SDCard...
Format
Naming
SD Info
Format?
(erases)
No
Ye s
Recorded File Naming
Choose to name the recorded files by the sequence
number, by the clock time or by scene and take.
Naming
Seq #
Clock
Sc&Take
SDCard...
Format
Naming
SD Info