User's Manual

Wireless Designer Software
The software GUI provides an overall view of the system,
including all mainframes connected. The display is scal-
able to fit and screen size and several color themes are
provided.
DBa Belt Pack Transmitter
The belt pack transmitter is
constructed of solid machined
aluminum for lasting rugged-
ness. The exterior is finished
with an ultra hard, black
electroless nickel finish called
ebENi.
Setup and adjustment is en-
abled through a backlit LCD,
membrane switches and an
intuitive menu structure. Input
gain is adjustable over a wide
range in 1 dB steps to opti-
mize modulation and limiting.
The servo bias input preamp
adapts to any microphone or
line level input with simple con-
nector wiring.
A separate switch is provided
on the top panel that can be
configured as a mute or power
switch, or be bypassed.
Firmware updates are made
through a side panel mini-USB
port.
Frequency coordination is fast and thorough. Scan data
may be imported and used in the coordination. When
individual carriers are moved manually, compatibility is
instantly recalculated and displayed.
Overview before frequency coordination
Overview after frequency coordination
System overview with scan results
Frame view with popup for individual receiver setup
Top panel input jack, mute/power switch and
antenna connection.
Battery compartment uses two AA batteries
connected in series. Aluminum door latches
securely.