Voice Projector Plus Power 25 ® OPERATING INSTRUCTIONS and trouble-shooting guide LECTROSONICS, INC.
INTRODUCTION The Plus Power 25 Extension Speaker is designed to provide virtually unlimited additional sound coverage when operated in conjunction with any of the Voice Projector® family of portable sound systems and micro phone mixers. In addition, it is intended to offer an easy method of providing additional audience coverage when used to amplify the high level remote speaker output from tape cassette players, sound motion picture projec tors, video tape players, etc.
Voice Projector Extension Speaker POWER PACK REPLACEMENT As the J-7 Power Pack in the Plus Power 25 nears the end of its useful life, its output voltage will begin to drop, causing the Plus Power 25 sound to become increas ingly distorted. Whenever this distortion becomes noticeable the power pack should be replaced. If there is no sound output, check all power pack connections before returning the unit for repair.
Voice Projector Model PP25 REPLACEMENT PARTS LIST 4 Part Number Schematic Reference Description A3012 None PP-25 Amplifier Assembly 15002 C1 Capacitor, 0.
Voice Projector Extension Speaker Rio Rancho, NM – USA 5
SERVICE AND REPAIR If your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment needs repair. Make sure you have followed the setup procedure and operating instructions. Check out the intercon necting cords and then go through the TROUBLE SHOOTING section in the manual We strongly recommend that you do not try to repair the equipment yourself and do not have the local repair shop attempt anything other than the simplest repair.
