Manual

SPECIFICATIONS AND FEATURES

R170 RECEIVER

Operating frequencies: 150 to 216 MHz crystal controlled

Sensitivity: 1.0uV for 20dB SINAD

2.0uV for 50dB S/N ratio

Signal/noise ratio: 96 dB flat; 100 dB A-weighted

Squelch quieting: greater than 100 dB

AM rejection: -40 dB (10uV to 0.1 Volts)

Modulation acceptance: ±15kHz

Image/spurious rejection: greater than 100 dB

Audio outputs: * XLR: 200 Ohm balanced; 100mV max.

* ¼ inch: 600 Ohm; 700 mV max.

(500 mV max. unbalanced)

* RCA: 1k Ohm unbalanced; 1 Volt max.

Audio input: RCA jack for unity gain audio mixing bus

Antenna input: PL259 female; 50 Ohm impedance

Controls: Front panel attenuator controls balanced outputs; 3

position power/function switch

Indicators: LED for power "ON"

2 LEDs for modulation level

"RF" LED for transmitter "ON"

Power requirements: * 12 Volt DC direct to panel mounted jack

* 110 Volt AC via CH-12 AC adapter

Power consumption: 125 mA max.

Weight: 2.1 lbs

Dimensions: 2.9 x 7.4 x 5.3 inches