User's Manual

SMWB Series
LECTROSONICS, INC.
8
Turning Power ON and OFF
Turning the Power ON
The power button turns the unit on and off, and pro-
vides access to a secondary menu. When the button is
pressed, several different startup screens may appear
depending upon the selected operating mode.
• If no operating mode has been selected, the first
screen to appear will prompt you to select the de-
sired mode
Use UP and DOWN
arrow buttonss to
select the function
Choose
Function
Xmit
Record
• If the mode is set to Xmit (transmitter), the first
screen will be the Xmit Main Window
Hold
for
Rf On
...1
Release Power
Button before
the counter
reaches 3 to
enter standby
mode (no
transmission)
5
494.500
-40
-20
0
1
b 19
RF indicator blinks
NOTE: A brief press of the power button will turn
the unit on in the Standby mode with the RF output
turned off. Press and hold the power button while
an on screen counter steps from 1 to 3 to turn the
unit on with the RF output turned on.
Hold
for
Rf On
...3
5
494.500
-40
-20
0
1
b 19
RF indicator not blinking
Hold power
button until
the counter
reaches 3
• If the mode is set to Record, the first screen to ap-
pear with be the Record Main Window.
-40
-20
0
REC
Turning the Power OFF
Press and hold the power button until the on screen
counter reaches 1 to turn the unit off. There is also an
item in the power menus to turn the unit off (see menu
maps in following sections).
Selecting between
Transmit and Record
Modes
The SMWB can be configured as a transmitter or as a
recorder. To select the configuration, hold the UP arrow
button in then press the power button. Use the UP and
DOWN arrow buttons to select the desire mode.
Use UP and DOWN
arrow buttonss to
select the function
Choose
Function
Xmit
Record
If the Xmit mode is selected, press the MENU/SEL
or power button to open the Xmit Main Window in the
standby mode.
If the Record mode is selected, press the MENU/SEL or
power button to open the Record Main Window.