User's Manual

UHF Digital Hybrid Wireless
®
Rio Rancho, NM
17
470 470.100 - 495.600 Black w/ Label 5.56” 141.2 mm
19 486.400 - 511.900 Black w/ Label 5.27” 133.9 mm
20 512.000 - 537.500 Black w/ Label 4.93” 125.2 mm
21 537.600 - 563.100 Brown w/ Label 4.71” 119.6 mm
22 563.200 - 588.700 Red w/ Label 4.48” 113.8 mm
23 588.800 - 614.300 Orange w/ Label 4.27” 108.5 mm
24 614.400 - 639.900 Yellow w/ Label 4.07” 103.4 mm
25 640.000 - 665.500 Green w/ Label 3.87” 98.3 mm
26 665.600 - 691.100 Blue w/ Label 3.68” 93.5 mm
BLOCK FREQUENCY CAP/SLEEVE ANTENNA
RANGE COLOR WHIP LENGTH
The AMJ antenna is a general purpose design for any
Lectrosonics receiver or transmitter with a standard
SMA connector. The hinged joint pivots in both direc-
tions for positioning the whip at any desired angle.
32
470
944
33
31
21
22
23 24
25 26 27
28 29
30
20
19
AMJ KIT CUTTING TEMPLATE
Lay uncut antenna on this template and cut to length for the desired frequency block
Note: Check the scale of your printout. This line should be 6.00 inches long (152.4 mm).
Whip Length
Tr im the end of the color cap and slide the remaining sleeve over the whip - OR - Glue color cap onto the end
*Cut end of cap off
and slide over whip
Frequency Blocks
*Color cap
The hinged joint pivots in both directions
AMJ Rev. A Jointed Antenna