Package Contents Wireless Charging Receiver Perforation Inductive Shutdown Button Protruding
Installation 1. The Pool Light 1.1 Place the pool light into the existing niche which is pre-mounted to the wall in a pool. 1.2 Secure the pool light with the given 3/16” flathead screw.
Caution: When finish the installation, please add a proper warning marking or label next to the light in order to prevent people put their fingers in the gap or bend the paddle. It could cause the pool light damaged. Do not bend the paddle. Do not put your fingers in the gap.
2. The Wireless Charger 2.1 Fasten the extended arm . 2.2 Connect the wireless charger with the AC adapter. 2.3 Plug the AC Adapter to the AC outlet. Note: The connectors and AC adapter are not waterproof. Please make sure they are placed in the sheltered or interior location.
3. The Gateway 3.1 Plug the AC Adapter to the AC outlet. The power indicator will light up with green. Note: The gateway is not waterproof. Please make sure they are placed in the sheltered or interior location. The power indicator will light up with green. Gateway Note: Make sure there is no metal hardware or metal plate next to the gateway which could block the wireless signal transmission.
4. Charging Procedure 4.1 Place the wireless charger paddle (the transmitter) to attach the charging receiver paddle properly. The charger will be attracted magnetically by the receiver paddle when getting closer to it Wireless charger paddle Note: In order to have the charging process works properly, please make sure the charger paddle is centered and aligned with the charging receiver paddle.
Caution: During the charging procedure, please route the cords away from the walkway or use proper signages to ensure pool users are aware of the cords.
4.2 The pool light will be lighting up with white color when it gets started the charging process. In the meantime, the charging indicator be blinking with orange light. It takes about 25 hours to fully charge the pool light. 4.3 Remove the charger once the charging indicator turns green which means the pool light is fully charged. Remove the charger once the charging indicator turns green. The pool light will be lighting up with white color.
5. Power Off / Sleep Mode When the pool light is expecting to power off for a long time. Users have two ways to power off the pool light. 1. Tap the power button in the APP throughout the smartphone. 2. Attach the given magnet stick to the inductive shutdown button for one second. 3. The pool light can always be waked by executing the charging procedure.