Datasheet
Leddar™ IS16
Industrial Solid-State LiDAR Sensor
Industrial
automation
Multi-Segment Flash LiDAR with IP67 Enclosure
for Harsh Industrial Environments
Specially designed for the industrial market, the Leddar™
IS16 industrial solid-state sensor is optimized for 0 to 50
m
detection and ranging applications, providing both distance
and angular positioning while performing fast, continuous,
and accurate analysis of the area.
The 48-degree beam, produced by
diffused light pulses
and processed through innovative algorithms, enables this
unique sensor to detect, locate, and measure a wide range
of objects under various environmental conditions.
Features
•
16 independent segments with simultaneous acquisition
and lateral discrimination capabilities
•
48-degree beam for optimized field of view
•
0 to 50 m detection range
•
Fast data refresh rate (up to 50 Hz)
•
LCD display for configuring and monitoring ongoing
operations
•
Fast setup and integration
Benefits
•
IP67 weather-resistant enclosure
•
Proven reliability in harsh conditions
•
Immune to ambient light
•
No moving parts, for superior robustness
•
Low power consumption
Presence Detection Mode
The IS16 software includes Presence Detection mode,
where the PNP/NPN
outputs can be set according to
whether or not there are objects within the configured
detection zones (two zones, one per output).
With the “Teach Configuration” feature, the sensor can
define the perimeter of its surroundings as a detection
zone. In Quic
k mode, a near limit and a far limit can be
easily configured to quickly define detection zones.
Alternatively, zones can also be configured manually in
Advanced mode, where near and far limits can be set for
each segment and unwanted segments, deactivated.
Raw Measurements Mode
The IS16 also provides the capabilities to acquire and log
all measurements from all segments in real time through
the RS-
485 link. Each measurement provides the distance
of the detected object, the index of the segment it was
detec
ted in, and the intensity of the measurement
(indication of how much light was reflected off the object
and captured by the sensor).
Presence Detection mode
Raw Measurements mode
A custom zone can be defined and
unneeded segments, disabled