User Manual

19
3.2. Optional SPI cable
The table below shows the pinout of the optional SPI cable sold by LeddarTech.
Refer to Figure 2 for connection information.
Table 6: Optional SPI Cable Pinout
Wire Color
Function
Black
Ground
Blue
Reset_N
Orange
SCLK
Green
MISO
Yellow
MOSI
Brown
CS#
3.3. Setup
This section presents the Leddar™ Configurator installation and the procedure to set
up the LeddarVu module. All software operations are described in chapter 6.
To install Leddar™ Configurator:
Download the LeddarInstaller.exe file from our Web site at
http://support.leddartech.com/login.
If you are a new user, fill the form and click Submit.
If you are a registered user, login by entering your e-mail address and
password, and click Log In.
In the Download section, click a product and then click
LeddarInstaller.exe. Double-click the file to start the installation.
1. On the computer desktop, double-click the Leddar™ Configurator
icon.
2. In the Welcome to the Leddar™ Software 3 Setup Wizard dialog
box, click Next.