User Manual

98 P/N 54A0028-2 012017© 2017 LeddarTech Inc. Printed in Canada. All rights reserved.
Figure 55: Example of detection filters
The following is a description of the parameters available in the Raw Detections
dialog box.
Min and Max Amplitude
The value entered in the Min Amplitude box shows only detections of amplitude
higher or equal to that value. For example, if the minimum amplitude is set to 5,
only the detections of amplitude 5 and more will be displayed.
The value entered in the Max Amplitude box will show only detections of amplitude
lower or equal to that value. For example, if the maximum amplitude is set to 8,
only the detections of amplitude 8 and lower will be displayed.
Setting a value in both fields will result in a range of amplitude to display.
Min and Max Distance
The value entered in the Min Distance box will show only detections at a distance
greater or equal to that value. For example, if the minimum distance is set to 10,
only the detections at a distance of 10 and more will be displayed.