User's Manual
11
Step 3. Enter your recovery phrase
1.
Choose the length of your recovery phrase (12, 18 or 24 words). Press both
buttons to validate.
2.
Enter the first letters of Word #1 by selecting them with the right or left button.
Press both buttons to validate each letter.
3.
Choose Word #1 from the suggested words. Press both buttons to validate it.
4.
Repeat the process until the last word of your recovery phrase.
5.
Your device is ready is shown once you've successfully completed the setup
process. Press both buttons to Access Dashboard. You will then arrive on the
Dashboard.
Security tips
●
Ensure you are the only holder of your recovery phrase. Anyone with access to it
could take your assets. Store it securely.
●
Ledger does not keep a backup of your 24 words. Never use a device supplied
with a recovery phrase and/or a PIN code.
●
Contact Ledger Support in case of doubt.
Invalid recovery phrase?
●
Make sure the correct recovery phrase length is selected. Always enter all words
of a recovery phrase.
●
Verify that the order of the words entered on the device matches the order on
your Recovery sheet.
●
Check that all the words of your recovery phrase are on the BIP39 word list.
Next steps
You've successfully restored the private keys linked to the recovery phrase on your
device.
●
Check these tips on how to secure your recovery phrase and PIN code.
●
Install apps on your device and add accounts in Ledger Live.
●
Receive and send crypto assets.
Access Control Center
Access the Control Center on your Ledger Nano X device to lock or turn off your device,
to manage the battery and Bluetooth, and to access device settings.
Navigate the Control Center
1.
Hold both buttons for 3 seconds at any time to open the Control Center. The
battery status will be appear first.
2.
Navigate the Control Center by pressing either the left or right button.