Datasheet

www.i-led.co.uk
Intelligent LED Solutions, Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW
Telephone: [phone] Email: [e-mail] Web: www.i-led.co.uk
A division of Intelligent Group Solutions Ltd
10
© IGS Version V2 January 2019
ILS Driver Part Number Rating (Watts) Current (mA) Forward Voltage
IZC070-050A-9267C-SA 50W 700mA 24-72V
IZC050-060F-9067C-QA 60W 500mA 40-110V
IZC070-075A-9267C-SA 75W 700mA 54-108V
IZC140-120M-9065C-SAL 120W 1400mA 54-108V
Thermal Interface Material Options
ILS have produced a range of High-performance, cost effective Thermal Interface Materials to match perfectly their
standard products.
These products fill the air pockets between the two surfaces, forming a continuous layer to conduct heat away from the
LED to the Heatsink.
ILS offer TIM in three options – double sided adhesive, single sided adhesive and non adhesive.
Product Non Adhesive Single Sided Adhesive Double Sided Adhesive
Star
ILA-TIM-STAR-0A ILA-TIM-STAR-1A ILA-TIM-STAR-2A.
25x25mm Cluster ILA-TIM-CLUSTER-25x25-0A ILA-TIM-CLUSTER-25x25-1A ILA-TIM-CLUSTER-25x25-2A.
30x30mm Cluster ILA-TIM-CLUSTER-30x30-0A ILA-TIM-CLUSTER-30x30-1A ILA-TIM-CLUSTER-30x30-2A.
300x20mm Strip ILA-TIM-STRIP-300x20-0A ILA-TIM-STRIP300x20-1A ILA-TIM-STRIP-300x20-2A.
25x15mm Strip ILA-TIM-STRIP-25x15-0A ILA-TIM-STRIP-25x15-1A ILA-TIM-STRIP-25x15-2A.
58x58mm Square ILA-TIM-SQUARE-58X58-0A ILA-TIM-SQUARE-58X58-1A ILA-TIM-SQUARE-58X58-2A.
Other sizes are available, including customised parts
Assembly Information
z The mounting of the OSLON
®
4 PowerStar IR has to be on a metal Heatsink.
z In order to optimise the thermal management, the metal surface needs to be clean (dirt and oil free) and planar for
the best contact with the LED module. A thermal grease or heat transfer material is highly recommended.
Safety Information
z The LED module itself and all its components must not be mechanically stressed.
z Assembly must not damage or destroy conducting paths on the circuit board.
z The mounting of the module is carried out by attaching it at the mounting holes. Metal mounting screws must be
DATASHEET