Datasheet

ManualsBrandsLediL ManualsLEDsSMD LED 20mm Round White SMD

Intelligent LED Solutions, Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW

Telephone: +44 (0)1635 294606 Email: info@i-led.co.uk Web: www.i-led.co.uk

A division of Intelligent Group Solutions Ltd

DATASHEET

OSCONIQ

P3030 1 LED PowerStar Colours

ILH-PO01-xxxx-SC221-WIR200.

Product Overview

At the heart of each PowerStar is an OSCONIQ

P3030 Series LED from OSRAM Opto Semiconductors with more

than one watt of optical power. This small package with it’s integrated lens allows superior compact arrangements

of very high power, whilst also being available in 9 different colours. Due to its compact size and varieties of colours

available this package is perfect for Horticultural Lighting, among other applications. PowerStars are compact, powerful

LED light sources built on aluminium substrates for optimal thermal management. Available with 200mm wires as standard.

Applications

z General lighting

z Decorative lighting

z Task lighting

z Spot lighting

z Downlighters

z Retail and entertainment lighting

z Horticultural Lighting

Technical Features

z Up to 50,000 hours lifetime to 70% of original brightness

z PowerStars contain OSCONIQ

P3030 LED from OSRAM Opto Semiconductors with integral 120 degree or 130

degree silicone resin Lens

z Secondary Lens can be ﬁtted – check suitable options in the Lens and Reﬂectors section

z Suitable Heatsinks available – check suitable options in the Heatsink section

z Matching Power Supply available - check suitable options in the Power Supply section

z Mounting holes using M3 screws allow easy installation

z Available with 200mm connecting wires

z Size (LxWxH): 20x20x3.23mm

z PowerStars can be linked together to produce longer chains

z Current range 100mA to 1300mA

*This datasheet should be read in conjunction with the relevant OSRAM Opto Semiconductors data on the LED used

Summary of content (8 pages)

PAGE 1
OSCONIQ® P3030 1 LED PowerStar Colours ILH-PO01-xxxx-SC221-WIR200. Product Overview At the heart of each PowerStar is an OSCONIQ® P3030 Series LED from OSRAM Opto Semiconductors with more than one watt of optical power. This small package with it’s integrated lens allows superior compact arrangements of very high power, whilst also being available in 9 different colours. Due to its compact size and varieties of colours available this package is perfect for Horticultural Lighting, among other applications.
PAGE 2
www.i-led.co.uk Important Information and Precautions z PowerStars, when powered up, are very bright. Thus it is advised that you do not look directly at them. Turn the PowerStar product away from you and do not shine into the eyes of others. z PowerStar products will overheat in operation if not attached to a suitable Heatsink. Overheating can cause failure or irreparable damage. z Do not operate PowerStar products with a Power Supply with unlimited current.
PAGE 3
www.i-led.co.uk Radiation of single LED 120˚ 130˚ 3D drawing files are available on request from ILS. Please call or email Intelligent LED Solutions, Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW Telephone: +44 (0)1635 294606 Email: info@i-led.co.uk Web: www.i-led.co.
PAGE 4
www.i-led.co.uk Lens and Reflector Options LEDiL precision-engineered Lenses and Reflectors allow for rapid deployment of all types of light fixtures, including street lights, wall-wash, high-bay, sconces, emergency beacons, parking garage/low-bay, MR and AR down lights, and dock lights. Precision-engineered for maximum efficiency and durability, LEDiL Lenses and Reflectors are released alongside the latest product releases from our LED suppliers.
PAGE 5
www.i-led.co.uk OSCONIQ P3030 1 LED PowerStar Power Supply Options ILS has a comprehensive range of standard Power Supplies. The table below shows forward voltage of each LED driver please consult the product options table to find the forward voltage of the PowerStar used. Additional Power Supplies are being introduced so please call us or check our website for the latest offering. To determine how many PowerStars can be used with each LED driver you will need the following.
PAGE 6
ILS Driver Part Number Rating (Watts) Current (mA) Output Volts IZC070-035F-0067C-SA 35W 700mA 9-48V IZC105-035F-9067C-QA 35W 1050mA 16-32V IZC045-040A-9266C-SA 40W 450mA 30-89V IZC095-040M-9067C-SAL 40W 950mA 25.
PAGE 7
www.i-led.co.uk Thermal Interface Material Options ILS has a range of high-performance, cost effective Thermal Interface Materials to match perfectly their standard products. Our product fills the air pockets between the two surfaces, forming a continuous layer to conduct heat away from the LED to the Heatsink. Product Non Adhesive Single Sided Adhesive Double Sided Adhesive Star ILA-TIM-STAR-0A ILA-TIM-STAR-1A ILA-TIM-STAR-2A.
PAGE 8
www.i-led.co.uk For further information please contact ILS Intelligent LED Solutions, Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW Telephone: +44 (0)1635 294606 Email: info@i-led.co.uk Web: www.i-led.co.uk A division of Intelligent Group Solutions Ltd 8 DATASHEET © IGS Version V1 October 2019 The values contained in this data sheet can change due to technical innovations. Any such changes will be made without separate notification.