Datasheet

ManualsBrandsLediL ManualsLEDsSMD LED 20mm Round 3500K Warm White SMD

Intelligent LED Solutions, Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW

Telephone: +44 (0)1635 294606 Email: info@i-led.co.uk Web: www.i-led.co.uk

A division of Intelligent Group Solutions Ltd

DATASHEET

OSCONIQ

P3030 1 LED PowerStar CRI 80

ILH-PO01-xx80-SC221-WIR200.

Product Overview

At the heart of each PowerStar is an OSCONIQ

P3030 Series LED from OSRAM Opto Semiconductors, which

has a high CRI rating of 80 with more than one watt of optical power. The small package with an integrated Lens

allows superior, compact arrangements of very high power density, whilst also being available in 6 different colour

temperatures of white. PowerStars are compact, powerful LED light sources built on aluminium substrates for optimal

thermal management. Available with 200mm wires as standard.

Applications

z Architecture

z Area Lights

z Downlights/Spotlights

z Mood Lighting

z General lighting

z Decorative lighting

z Task lighting

z Spot lighting

z Downlighters

z Retail and entertainment lighting

Technical Features

z Up to 50,000 hours lifetime to 70% of original brightness

z OSCONIQ

P3030 PowerStars contain OSCONIQ

P3030 LEDs with integral 120 degree silicone resin Lenses

z Secondary Lens can be ﬁtted – check suitable options in Lens and Reﬂector section

z Suitable Heatsinks available – check options in Heatsink section

z Suitable Thermal Interface Material available - check options in Thermal Interface Material section

z Matching Power Supply available - check options in Power Supply section

z Mounting holes using M3 screws allow easy installation

z Available with 200mm connecting wires

z Size (LxWxH): 20x20x3.23mm

z PowerStars can be linked together to produce longer chains

z Current range 100mA to 1300mA

z CRI 80

*This datasheet should be read in conjunction with the relevant OSRAM Opto Semiconductors data on the LED used

Summary of content (7 pages)

PAGE 1
OSCONIQ® P3030 1 LED PowerStar CRI 80 ILH-PO01-xx80-SC221-WIR200. Product Overview At the heart of each PowerStar is an OSCONIQ® P3030 Series LED from OSRAM Opto Semiconductors, which has a high CRI rating of 80 with more than one watt of optical power. The small package with an integrated Lens allows superior, compact arrangements of very high power density, whilst also being available in 6 different colour temperatures of white.
PAGE 2
www.i-led.co.uk Important Information and Precautions z PowerStars, when powered up, are very bright. Thus it is advised that you do not look directly at them. Turn the PowerStar product away from you and do not shine into the eyes of others. z PowerStar products will overheat in operation if not attached to a suitable Heatsink. Overheating can cause failure or irreparable damage. z Do not operate PowerStar products with a Power Supply with unlimited current.
PAGE 3
www.i-led.co.uk Radiation of single LED Technical Drawing with Cables (mm) 20mm Intelligent LED Solutions, Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW Telephone: +44 (0)1635 294606 Email: info@i-led.co.uk Web: www.i-led.co.uk A division of Intelligent Group Solutions Ltd 3 DATASHEET © IGS Version V2 Febraury 2020 3D drawing files are available on request from ILS.
PAGE 4
www.i-led.co.uk Lens and Reflector Options LEDiL precision-engineered Lenses and Reflectors allow for rapid deployment of all types of light fixtures, including street lights, wall-wash, high-bay, sconces, emergency beacons, parking garage/low-bay, MR and AR down lights, and dock lights. Precision-engineered for maximum efficiency and durability, LEDiL Lenses and Reflectors are released alongside the latest product releases from our LED suppliers.
PAGE 5
www.i-led.co.uk OSCONIQ® P3030 1 LED PowerStar Power Supply Options ILS has a comprehensive range of standard Power Supplies. The table below shows the total number of ILS products each Power Supply can drive. Additional Power Supplies are being introduced so please call us or check our website for the latest offering. For example ILH-PO01-FW80-SC221-WIR200. forward voltage of 2.7-3.2V (this can be found under Product Options page 2) and IZC035-004F-4065C-SAL has an output voltage of 3-12V.
PAGE 6
www.i-led.co.uk ILS Driver Part Number Rating (Watts) Current (mA) Output Volts IZC045-040A-9266C-SA 40 450 3089 IZC095-040M-9067C-SAL 40 950 25.
PAGE 7
www.i-led.co.uk Assembly Information z The mounting of the OSCONIQ® P3030 has to be on a metal Heatsink. z In order to optimise the thermal management, the metal surface needs to be clean (dirt and oil free) and planar for the best contact with the LED module. A thermal grease or heat transfer material is highly recommended. Safety Information z The LED module itself and all its components must not be mechanically stressed. z Assembly must not damage or destroy conducting paths on the circuit board.