Datasheet

ManualsBrandsLediL ManualsLEDsSMD LED 20mm Round 5500K Daylight SMD

Intelligent LED Solutions,Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW

Telephone : +44 (0)1635 294606 Fax : +44 (0)1635 869200 Email: info@i-led.co.uk www.i-led.co.uk

A division of Intelligent Group Solutions Ltd

DATASHEET

SIGNAL OSLON

4 PowerStar

ILH-SO04-xxxx-SC2#1-WIR200.

Product Overview

At the heart of each PowerStar are 4 OSLON

Signal ThinGan (UX:3)

LED. OSLON

SSL can be driven up to 1000mA. OSLON Signal LEDs

support cutting edge trafﬁc light designs with a signiﬁcantly reduced

number of LEDs per signal. The tiny ceramic-based high-performance

package from Osram Opto Semiconductors sets new standards in

terms of electro-optical efﬁciency even at high temperatures, including a

high-efﬁciency yellow LED with a ceramic converter. OSLON

Signal is

available in various colours and performance classes.

Applications

z Emergency Vehicle

z Trafﬁc Light

z Aftermarket Auto

z Signalling

z Maker Lights

z Working Lights

Technical Features

z PowerStars contain 4 OSRAM Opto OSLON

Signal LEDs

z Up to 50,000 hour lifetime to 70% of original brightness

z Mounting holes using M3 screws allows easy installations

z Size (LxWxH): 20mm x20mm x3.85mm

z Available with or without 200mm connecting wires

z PowerStars can be linked together to produce longer chains

z Current range 30mA to 1000mA

*This datasheet should be read in conjunction with the relevant OSRAM Opto Semiconductors data on the LED used

Summary of content (7 pages)

PAGE 1
SIGNAL OSLON® 4 PowerStar ILH-SO04-xxxx-SC2#1-WIR200. Product Overview At the heart of each PowerStar are 4 OSLON® Signal ThinGan (UX:3) LED. OSLON® SSL can be driven up to 1000mA. OSLON Signal LEDs support cutting edge traffic light designs with a significantly reduced number of LEDs per signal.
PAGE 2
www.i-led.co.uk Important Information and Precautions zz The PowerStar’s LEDs, when powered up, is very bright. Thus it is advised that you do not look directly at it. Turn the PowerStar away from you and do not shine into the eyes of others zz Do not operate the PowerStar with a Power Supply with unlimited current. Connection to constant voltage Power Supplies that are not current limited may cause the PowerStar to consume current above the specified maximum and cause failure or irreparable damage.
PAGE 3
www.i-led.co.uk Minimum and Maximum Ratings ILS PART NUMBER Operating Temperature at Tc-Point [˚C]* Storage Temperature [˚C]* Forward Current per chip [mA]* Reverse Voltage [Vdc]* ILH-SO04-SIBL-SC211WIR200. 70˚C max - 40 to 110˚C 1,000mA max not designed for reverse voltage ILH-SO04-SICB-SC211WIR200. 70˚C max - 40 to 110˚C 1,000mA max not designed for reverse voltage ILH-SO04-SIVG-SC211WIR200. 70˚C max - 40 to 110˚C 1,000mA max not designed for reverse voltage ILH-SO04-SITG-SC211WIR200.
PAGE 4
www.i-led.co.uk Technical Drawing with cables (mm) 3D drawing files are available on request from ILS. Please call or email OSLON Signal 4 PowerStar Lens and Reflector Options LEDiL precision-engineered Lenses and Reflectors allow for rapid deployment of all types of light fixtures, including street lights, wall-wash, high-bay, sconces, emergency beacons, parking garage/low-bay, MR and AR downlights, and dock lights.
PAGE 5
www.i-led.co.
PAGE 6
www.i-led.co.uk OSLON Signal PowerStar Power Supply Options ILS has a comprehensive range of standard Power Supplies. The table below shows the total number of ILS products each Power Supply can drive. © IGS Version V1 February 2016 Additional Power Supplies are being introduced so please call us or check our website for the latest offering. Constant Current LED Drivers ILS Driver Part No.
PAGE 7
www.i-led.co.uk Thermal Interface Material Options ILS have produced a range of High-performance, cost effective Thermal Interface Materials to match perfectly their standard products. Our product fills the air pockets between the two surfaces, forming a continuous layer to conduct heat away from the LED to the Heat Sink. ILS offer our TIM in three options – double sided adhesive, single sided adhesive and non adhesive.