Datasheet

ManualsBrandsLediL ManualsIR LEDsIR-LED 1.05um 20mm SMD

Intelligent LED Solutions, Unit 2, Berkshire Business Centre, Berkshire Drive, Thatcham, Berkshire, RG19 4EW

Telephone: +44 (0)1635 294606 Email: info@i-led.co.uk Web: www.i-led.co.uk

A division of Intelligent Group Solutions Ltd

DATASHEET

SYNIOS P2720 Broadband PowerStar

ILH-SY01-BBEM-SC201-WIR200.

Product Overview

At the heart of each PowerStar is the SYNIOS P2720 LED from OSRAM

Opto Semiconductors. The SYNIOS P2720 LED emits broadband infrared

light in wavelengths ranging from 650 to 1,050 nanometres (nm). It is

ideal for near-infrared spectroscopy, which can be used to assess food,

medicine and even measure body fat. The SYNIOS P2720 created a

whole new ﬁeld of compact, robust and low-cost sensing technology that

did not exist before, making it possible to integrate spectrometers directly

into mobile devices like smartphones and tablets. PowerStars are compact,

powerful LED light sources built on aluminium substrates for optimal

thermal management. Available with 200mm wires as standard.

Applications

z Infrared Spectroscopy

z Medical

z Wearables

Technical Features

z Up to 50,000 hours lifetime to 70% of original brightness

z PowerStars contain SYNIOS

P2720 LEDs

z Secondary Lens can be ﬁtted – check options in suitable Lens and Reﬂector section

z Suitable Heatsinks available – check options in Heatsink section

z Matching Power Supply available - check options in Power Supply section

z Mounting holes using M3 screws allow easy installation

z Available with 200mm connecting wires

z Size: (LxWxH) 20x20x2.2mm

z PowerStars can be linked together to produce longer chains

z Forward Current: 500mA

*This datasheet should be read in conjunction with the relevant OSRAM Opto Semiconductors data on the LED used

Summary of content (6 pages)

PAGE 1
SYNIOS P2720 Broadband PowerStar ILH-SY01-BBEM-SC201-WIR200. Product Overview At the heart of each PowerStar is the SYNIOS P2720 LED from OSRAM Opto Semiconductors. The SYNIOS P2720 LED emits broadband infrared light in wavelengths ranging from 650 to 1,050 nanometres (nm). It is ideal for near-infrared spectroscopy, which can be used to assess food, medicine and even measure body fat.
PAGE 2
www.i-led.co.uk Important Information and Precautions z The PowerStar, when powered up, are very bright. Thus it is advised that you do not look directly at them. Turn the PowerStar away from you and do not shine into the eyes of others. z PowerStars will overheat in operation if not attached to a suitable Heatsink. Overheating can cause failure or irreparable damage. z Do not operate PowerStars with a Power Supply with unlimited current.
PAGE 3
www.i-led.co.uk Technical Drawing with Cables (mm) Coming soon 3D drawing files are available on request from ILS.
PAGE 4
www.i-led.co.uk 1+ PowerStars 4+ PowerStars 9+ PowerStars 16+ PowerClusters Operates under the recommended ILS junction temperature Operates under the recommended LED maximum junction temperature Not suitable for use Heatsink not N/A designed for use with this product ILA-HSINK-78X46X25MM. ILA-HSINK-70X70X55MM. ILA-HSINK-STAR-50X80MM. ILA-HSINK-STAR-50X60MM. ILA-HSINK-STAR-50X40MM. ILS Product ILA-HSINK-STAR-50X20MM.
PAGE 5
www.i-led.co.uk ILS Driver Part No. Rating Current Output Voltage ILA-1CH-LED-TESTER-USB-01 1.
PAGE 6
www.i-led.co.uk standard products. Our product fills the air pockets between the two surfaces, forming a continuous layer to conduct heat away from the LED to the Heatsink. As the Eco1 generates little heat, TIM is therefore not needed. Our double sided thermal tape would be suitable for fixing the Eco1 to a fixture, Heatsink and flat substrate. Product Non Adhesive Single Sided Adhesive Double Sided Adhesive PowerStar ILA-TIM-STAR-0A ILA-TIM-STAR-1A ILA-TIM-STAR-2A.