Assembly Instructions

8
ASSEMBLY
Requires 1, 2, 6
This tree includes 5 pre-programmed songs control box 2. The control box 2
enables the user to play with or without music by using the remote 6
When the tree is turned OFF and then turned back on it will default to the
light show with music automatically.
NOTE: Mounting pegs have been affixed to the 5 pre-programmed songs
control box 2 in order to provide elevation; enabling accessibility to the
control box and power box 2, due to the potential of a snowfall. Proceed in
mounting the 5 pre-programmed songs control box 2 onto the tree base 1 into
the two eyelets provided.
Step 7
Requires 1, 2
The tree base 1 has spring hooks
located on the outer edge of the tree
base 1. Connect each spring hook to
the corresponding chain on the tree
frame 2
Check to make sure that the chain links
are straight and even prior to attaching
to the base.
Straighten any twists in the links prior
to attaching.
Step 8
2
1
2
1
1
2
Spring
hook
Support
chain