Spec Sheet

‘IR-204E’ INTERCOM
SPECIFICATIONS
ARCHITECTS' & ENGINEERS'
SPECIFICATIONS
Stations: Intercom stations shall be Lee Dan model IR-204E or approved
equal. Stations shall be molded in white, high impact ABS plastic. Indi-
vidual pushbutton controls shall be provided for Talk, Listen, and Door
release functions. Button identification shall be provided in english, braille,
and by symbols. Pushbuttons shall be self-wiping type with positive screw
terminals. Pigtail connections are not acceptable. Speaker shall be 2.5", .3
Watt, 45 Ohm. Pushbuttons and speakers shall be field replaceable. Glued
in place components are not acceptable. Mounting screws shall be tamper
resistant Scrulox type.
Amplifier: Intercom amplifier shall be Lee Dan model PK-543A or approved
equal, and shall have a modular cable connector. Non modular connectors
shall not be acceptable. Amplifier shall be powered by a Lee Dan PS-30A
transformer (16VAC/30VA), or approved equal which shall be UL listed.
“Quantum” Lobby Panel (option 1 of 3): Intercom panel shall be a Lee Dan
vandal-proof Quantum
TM
series or approved equal. Panel shall be con-
structed of 16 gauge low-carbon Stainless Steel. Pushbuttons shall be heavy
6 amp rated, chrome plated, solid brass, round metal buttons. Pushbutton
connections must be made by positive screw terminals by
circuit board. Pigtail connections will not be acceptable. Apart-
ment numbers shall be permanently engraved directly on the
surface of the panel. Building address shall be permanently
engraved at the top of the lobby panel.
Speaker shall be 3.5", 1 Watt, 45 Ohm with mylar cone. Paper
cone speakers are not acceptable. Speaker shall be protected by
a three (3) layer metal speaker baffle. Intercom panel shall
include an integral alphabetical directory protected by Lexan
®
sheet. Speaker, pushbuttons and directory components shall all be field
replaceable. Glued in place components are not acceptable. Mounting
screws shall be tamper resistant Tampruf type. A Lee Dan model SC-T
Tampruf type screw driver shall be provided with each lobby panel for
directory maintenance.
“Van-Guard” Lobby Panel (option 2 of 3): Intercom panel shall be a Lee Dan
vandal resistant Van-Guard
TM
series or approved equal.
Panel shall be constructed of heavy extruded aluminum with
permanently engraved solid aluminum black anodized plung-
ers. Pushbuttons shall be self-wiping type with positive
screw terminals. Pigtail connections will not be acceptable.
Pushbuttons shall be mounted on a sub-plate mounted be-
hind the extruded aluminum module(s). Pushbuttons shall be
activated by pressing the solid metal plungers.
Speaker shall be 3.5", 1 Watt, 45 Ohm with mylar cone. Paper cone speakers
are not acceptable. Speaker shall be protected by a double metal speaker
baffle. Intercom panel shall include an integral alphabetical directory
protected by Lexan
®
sheet. Speaker, pushbuttons and directory components
shall all be field replaceable. Glued in place components are not acceptable.
Mounting screws shall be tamper resistant Scrulox type. A Lee Dan model
SC-1 Scrulox type screw driver shall be provided with each lobby panel for
directory maintenance.
Lexan
®
is a registered trademark of General Electric.
APPLICATION
IR-204E is an economical surface mount apartment
intercom station for new construction where new wiring
is used.
Contemporary styling, featuring stark white color and
pleasing lines, compliments most decors.
Advanced circuitry and simple pushbutton operation
make this the perfect station for use in large or small
buildings.
“Style E” Lobby Panel (option 3 of 3): Intercom panel shall be a Lee Dan
economy Style “E”
TM
series or approved equal. Panel shall be constructed
of extruded aluminum with permanently engraved number
strips. Panel styles without engraved apartment numbers
shall not be acceptable. Pushbuttons shall be self-wiping
type with positive screw terminals. Pigtail connections will
not be acceptable.
Speaker shall be 3.5", 1 Watt, 45 Ohm with mylar cone.
Paper cone speakers are not acceptable. Speaker shall be
protected by an ABS plastic speaker grille. Intercom panel
shall include metal nameholders for tenant identification. Plastic
nameholders shall not be acceptable. Speaker, pushbuttons and grille
components shall all be field replaceable. Glued in place components are
not acceptable. Mounting screws shall be tamper resistant Scrulox type.
A Lee Dan model SC-1 Scrulox type screw driver shall be provided with
each lobby panel for maintenance.
Other Accessories
DO-001 Mortise style electric door strike.
Normally locked type.
IH-400A Desk cabinet, sloping style, white.
PS-3A UL listed Pigtail transformer. 16VAC
10VA.
SC-1 ‘Scrulox’ type tamper screwdriver.
Model IR-204E
Innovations in Communications
since 1955
TM
®
®
©2002-2007 LEE DAN
®
Communications, Inc. IN-233 (1/07)
800-231-1414 • 631-231-1414
155 Adams Avenue • Hauppauge, NY 11788-3699
Fax [phone] • www.LEEDAN.com
Distributed By: