Spec Sheet

ARCHITECTS' & ENGINEERS'
SPECIFICATIONS
Stations: Intercom stations shall be Lee Dan model IR-107C or approved
equal. Stations shall be constructed of anodized aluminum extrusion with
black, high impact ABS plastic speaker grille. Individual pushbutton
controls shall be provided for Talk, Listen, and Door release functions.
Pushbuttons shall be self-wiping type with positive screw terminals. Pigtail
connections are not acceptable. Speaker shall be 3.5", 1 Watt, 45 Ohm.
Pushbuttons and speakers shall be field replaceable. Glued in place
components are not acceptable. Mounting screws shall be tamper resistant
Scrulox type.
Amplifier: Intercom amplifier shall be Lee Dan model PK-543A or approved
equal. Amplifier shall be powered by a Lee Dan model PS-30A transformer
(16VAC/30VA), or approved equal which shall be UL listed.
“Quantum” Lobby Panel (option 1 of 3): Intercom panel shall be a Lee Dan
vandal-proof Quantum
TM
series or approved equal. Panel shall be con-
structed of 16 gauge low-carbon Stainless Steel. Pushbuttons shall be heavy
6 amp rated, chrome plated, solid brass, round metal buttons. Pushbutton
connections must be made by positive screw terminals by
circuit board. Pigtail connections will not be acceptable.
Apartment numbers shall be permanently engraved directly
on the surface of the panel. Building address shall be perma-
nently engraved at the top of the lobby panel.
Speaker shall be 3.5", 1 Watt, 45 Ohm with mylar cone. Paper
cone speakers are not acceptable. Speaker shall be protected
by a three (3) layer metal speaker baffle. Intercom panel shall
include an integral alphabetical directory protected by Lexan
®
sheet. Speaker, pushbuttons and directory components shall
all be field replaceable. Glued in place components are not acceptable.
Mounting screws shall be tamper resistant Tampruf type. A Lee Dan model
SC-T Tampruf type screw driver shall be provided with each lobby panel
for directory maintenance.
“Van-Guard” Lobby Panel (option 2 of 3): Intercom panel shall be a Lee Dan
vandal resistant Van-Guard
TM
series or approved equal. Panel
shall be constructed of heavy extruded aluminum with perma-
nently engraved solid aluminum black anodized plungers.
Pushbuttons shall be self-wiping type with positive screw
terminals. Pigtail connections will not be acceptable.
Pushbuttons shall be mounted on a sub-plate mounted behind
the extruded aluminum module(s). Pushbuttons shall be
activated by pressing the solid metal plungers.
Speaker shall be 3.5", 1 Watt, 45 Ohm with mylar cone. Paper cone speakers
are not acceptable. Speaker shall be protected by a double metal speaker
baffle. Intercom panel shall include an integral alphabetical directory
protected by Lexan
®
sheet. Speaker, pushbuttons and directory components
shall all be field replaceable. Glued in place components are not acceptable.
Mounting screws shall be tamper resistant Scrulox type. A Lee Dan model
SC-1 Scrulox type screw driver shall be provided with each lobby panel for
directory maintenance.
Lexan
®
is a registered trademark of General Electric.
APPLICATION
IR-107C is an economical aluminum apartment inter-
com station for new construction, or upgrade from
existing plastic stations
Advanced circuitry and simple pushbutton operation
make this the perfect station for use in large or small
buildings.
“Style E” Lobby Panel (option 3 of 3): Intercom panel shall be a Lee Dan
economy Style “E”
TM
series or approved equal. Panel shall
be constructed of extruded aluminum with
permanently engraved number strips. Panel styles without
engraved apartment numbers shall not be acceptable.
Pushbuttons shall be self-wiping type with positive screw
terminals. Pigtail connections will not be acceptable.
Speaker shall be 3.5", 1 Watt, 45 Ohm with mylar cone.
Paper cone speakers are not acceptable. Speaker shall be
protected by an ABS plastic speaker grille. Intercom panel
shall include metal nameholders for tenant identification.
Plastic nameholders shall not be acceptable. Speaker, pushbuttons and
grille components shall all be field replaceable. Glued in place compo-
nents are not acceptable. Mounting screws shall be tamper resistant
Scrulox type. A Lee Dan model SC-1 Scrulox type screw driver shall be
provided with each lobby panel for maintenance.
Other Accessories
DO-001 Mortise style electric door strike.
Normally locked type.
IH-101 Flush back box for concrete and open
stud walls.
IH-102 Flush plaster ring for drywall construction.
OH-700 Surface box. Black powder coated steel.
PS-3A
UL listed Pigtail transformer. 16VAC 10VA
Model IR-107C
‘IR-107C’ INTERCOM
SPECIFICATIONS
Innovations in Communications
since 1955
TM
®
®
©2005-2008 LEE DAN
®
Communications, Inc. IN-107 (8/08)
800-231-1414 • 631-231-1414
155 Adams Avenue • Hauppauge, NY 11788-3699
Fax [phone] • www. LEEDAN .com
Distributed By: