User's Manual

Before you call, try some of the following suggestions…
*Remember that the capability of your system will be affected by: Foil backed wallboard, Metal mesh,
wire reinforced glass, metal sheeting, large mirrors, suspended ceilings, lift shafts etc. These can all
reflect and thereby reduce the signaling capability of the transmitter. A little forethought prior to
installation, coupled with a few tests, can normally avoid most of these problems.
FCC ID:QBTLT2001UG / Brand name:Playcall pager / Model No:LT2001UG
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS :
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
1. Read through the instruction manual. Answers to most questions can be found there. A trouble
shooting section further assists you in diagnosing the problem.
2. statement required by 15.21 :
The users manual or instruction manual for an intentional or unintentional radiator shall caution the
user that changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Warning: Changes or modifications made to this equipment not expressly approved by COMPANY may
void the FCC authorization to operate this equipment.
3. CAUTION : Never use any cleaner other than alcohol for the maintenance of this equipment. Organic
solvent such as benzene, toluene or acetone may spoil the plastic parts of this equipment.
4.RF Radiation Exposure
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment must be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.
5.Do not subject this equipment to:
1)Mechanical shock 2)Excessive humidity or moisture 3)Extremes of temperature 4)Corrosive
liquids
6.Warning ! No user serviceable parts
Alteration or modification to any part of this equipment,without the prior written consent of the
manufacturer,
Will invalidate all manufacturer approvals and warranty. No adjustments can be undertaken except by
qualified
And licensed persons as defined by the FCC Rules and Regulations. Operation of altered equipment can
result
pGSGSGGVGGGGU
WARRANTY
sll{lrG G GGGGGGGGGGG G GG G G T
GGGGGGGGUG G {GGGGGGGGG
GGSGGGGGUGw
w
GGGGG]WGUG~G
GGGG GGGG GUG pG G G G G G G G
GSGGGGGGGGSGGGUG G ~GGGGSG
GGGGGSGGGGGGGaG
sll{lrSGJ[``TYSGzZSG~SGwSGSGrUG
No return will be received without prior authorization
and the proper RMA # posted to the outside of the shipping container. {GGGGGGGG
GGGGGGGGGGUG