User's Manual

FND Coaster Pager User’s Manual
1. Handing out the Coasters
Give the guest a coaster. Note their name and Coaster number on the sign out sheet (Included).
Tell the guest the coaster will signal when their table (or Food) is ready. The default page for this
system is for the coaster to flash and vibrate for 3 minutes. After the coaster is finished vibrating it
automatically goes back into standby mode waiting for the next page. You can hand the coasters out
right from the charging stack (They will “demo” Page each time they are removed from the stack) or
you can simply store them in a basket and hand them out. A fully
Charged coaster will function without being recharged for 8 – 12 hours.
2. Paging the Guest
When the guest’s table (or food) is ready simply press the coaster number on the transmitter
Keypad followed by the “SEND” key. For example, Press “11-SEND” and coaster # 11 will signal.
3. Out of Range Feature
With this feature, the coaster will play a melody to inform your customer that they are Out of Range
and will miss their page. The melody will only stop if they are within range.
Default from the factory is Out of Range Off.
Out of Range on “9494”
Out of Range off “9393”
4. To turn the Out of Range feature an follow these procedures
Remove all the coasters from the charger base or simply unplug the power supply that is connected to
the charging unit. Press “911-ENTER-9494-SEND”. All the coasters will light up to tell you that they
have received the new code. To test the coasters, unplug the power supply that is connected to the
LEETEK transmitter. After 30 seconds, all the coasters will play a melody since they are not receiving a
signal from the transmitter. Return all the coasters to the charger base or plug in the power supply. The
coasters are ready to receive a page with the Out of Range feature turned on.
Follow the same procedure to turn the Out of Range feature off, but use the code “9393”
5. To Change the page type on a Coaster pager
With this feature you have the option of changing the way your coasters alert the guest.
Vibrate Only “9292”
Flash & Beep “9595” Note: the beep alert will only sound for the first 10second of the 3 minute alert.
Flash & Vibrate “9696”
Flash only “9797”
Beep, Flash & Vibrate “9898”