User's Manual

GEO MANAGER PAGER INSTRUCTIONS (Use this page if you use a Numeric Manager Pager)
Turn Pagers On:
The pagers come with the battery installed. To turn a pager on, press and hold the right button until
the pager vibrates. On the LCD, it will display the word “ON” to show the pager is operational. NOTE:
You can only
turn the pagers off by sending a code via the transmitter. See instructions below.
Sending a Pre-Programmmed Messages to the Geo Manager Pager
This system has the option of sending 4 different pre-programmed messages. This can be used for
sending
messages to managers or key employees. The default message is set to “HOST”. Press “91-
send”
and “HOST” will be displayed on pager # 91. With this feature you have the option of sending
the following messages:
Beep 1 – “CHEF ” Beep 3 - “HOST”
Beep 2 – “BAR” Beep 4 - “PHONE ”
To Send a different message:
From the transmitter, press the “pager number” followed by the” enter” key. For beep type
(refer your selection above) select the message you want to send then press “enter”and then press
“send..
Example: “91, enter, 2, enter, send”. Pager # 91 will vibrate and the display will show “BAR”.
To send a Numeric Message to the Geo Manager Pager:
With this feature you make up your own numeric codes telling the staff what each code means.
Press the pager number followed by the “enter” key twice. The display will read “enter message” -
Press the numbers you wish to send followed by the “send “ key. Example: “91, enter, enter, 911
send”
Pager # 91 will vibrate . The display will read “911”. Press the right button to stop the page. Press the
right
button again to read the message.
Here are some common examples of numeric messages:
♦ “911” message may mean report to the Managers Office Immediately.
♦ A “1” message may mean report to reception.
♦ An “8” message means you have a phone call. “81” means a call on line 1, “82” means a
call on line 2
etc. You can also enter a phone number. Ex. Message “770-555-1234” means you need to
call that number.
You make up a list that suits your needs specifically. Your messages can be up to 16 characters long.
To Delete a Message:
The pagers are set to hold the last 2 messages. You can leave the messages or delete them as you
chose. To
delete a message: Find the message to be deleted by pressing the right button. Press the middle key
and “delete” will appear on the display. Press the right button again to delete the message.
Right
button
Middle button