User's Manual

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

● Consult the dealer or an experienced radio/TV technician for help

The changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device

is permitted. Any change to the antenna or the device could result in the device exceeding the RF

exposure requirements and void user’s authority to operate the device.

This device complies with Part 15 of the FCC Rules .

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation..

Warning: Changes or modifications made to this equipment not expressly approved by

LEETEK may void the FCC authorization to operate this equipment.

CAUTION : Never use any cleaner other than alcohol for the maintenance of this equipment. Organic solvent

such as benzene, toluene or acetone may spoil the plastic parts of this equipment.

4.RF Radiation Exposure

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This

equipment must be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

5.Do not subject this equipment to:

1)Mechanical shock 2)Excessive humidity or moisture 3)Extremes of temperature 4)Corrosive liquids

6.Warning ! No user serviceable parts

Alteration or modification to any part of this equipment, without the prior written consent of the manufacturer,

will invalidate all manufacturer approvals and warranty. No adjustments can be undertaken except by qualified

and licensed persons as defined by the FCC Rules and Regulations. Operation of altered equipment can result

in fines, imprisonment, and /or confiscation of such equipment.

WARRANTY

LeeTek warrants this product against any defects that are due to faulty material or workmanship for a one-

year period after the original date of consumer purchase. This warranty does not include damage to the

product resulting from accident, misuse or improper electrical connection. Power supplies are warranted

for 60 days. We recommend the use of a surge protector with all equipment. If this product should

become defective within the warranty period, we will repair or replace with equivalent product, free of

charge. We will return your product, transportation charges prepaid standard shipping mode, provided the

product is shipped prepaid to:

LEETEK, 3

FL #499-2 Sang 3-dong, Wonmi-gu, Puchon-city, Kyunggi-do, KOREA

No return will be received without prior authorization and the proper RMA # posted to the outside of the

shipping container.

This warranty gives you specific legal rights and you may also have rights which vary from state to state.