User's Manual

(2) Select one among "Set Pager Alert:" list using *(←) and #(→) Key, and then press ENTER.
(3) "Are All Pagers Returned??" is displayed and then press ENTER.
(4) "Unplug All Coasters" is displayed and then press ENTER.
(5) "Message Sent Plug In Pager" is displayed and transmit message twice and then move to Menu Options.
* Pager Alert Message LIST
1.Vibe Only (9292)
2.Vibe & Flash (9696) 4.Flash & Beep (9595)
3.Flash Only (9797) 5.Flash & Vibe & Beep (9898)
※ To return to Menu Options on the process, input CANCEL.
6) Duty Alert SETUP
(1) Go to 6.Set Duty Alert using *(←) and #(→) Key and then press ENTER.
(2) Select 1.Duty Alert #1 using *(←) and #(→) Key and then press ENTER.
(3) Select 1.ON or 2.OFF using *(←) and #(→) Key and then select 1.NUMERIC TYPE or 2.ALPHA TYPE using *(←) and #(→) Key.
(4) Press ENTER and input Set Pager Number (available 1-1249) and then press ENTER again.
(5) Input Cycle Time (available 1-240 min.) and then press ENTER.
(6) Input ENTER Message (Can input Numeric Message up to 12 characters and Alpha Message up to 128 characters(including #,*))
and then press ENTER.
(7) "Duty 0001 Save" is displayed and move to Duty Alert(1-3) screen.(same way with Duty Alert #2 and Duty Alert #3)
(8) The screen moves to Menu Options.
※ To return to Menu Options on the process, input CANCEL.
7) Out of Range SETUP
(1) Go to 7.Out Of Range using *(←) and #(→) Key and then press ENTER.
(2) Select 1.On or 2.OFF using *(←) and #(→) Key and then press ENTER.
(3) "Are All Pagers Returned??" is displayed and then press ENTER.
(4) "Unplug All Coasters" is displayed and then press ENTER.
(5) "Message Sent Plug In Pagers" is displayed and transmit Message twice.
(6) With saving, move to Menu Options(Out of Range).
※ To return to Menu Options on the process, input CANCEL.
cf) Out of Range:ON(Message 9494), Out of Range:OFF(Message 9393)
8) Alpha Message SETUP