User's Manual

corresponding waiter pager.
(2) After transmitting is finished, green LED is blinking
(3) When you press Cancel Button shortly, it transmits cancel data to corresponding
waiter pager.
3) TO PAGE MANAGER
(1) When you press Manager Button shortly, it transmits cancel table number data to
corresponding manager pager.
(2) After transmitting is finished, red LED is blinking
(3) When you press Cancel Button shortly, it transmits cancel data to corresponding
manager pager.
4) TO CANCEL
z Cancel signal is received, the corresponding table number is deleted after
displaying the table number and “CANCEL” twice.
z Then pager goes to waiting mode and display “READY”
z All the table number stored deleted when reset or turn pager OFF and ON.
5) TO CHARGE
When you make it charged, charging LED at the right side of number label is ON.