User's Manual

required of them. For example, a buzzer can receive a page every 3 minutes to remind him to check the restroom.
You can assign up to 3 different groups to be duty alert pagers.
To program the duty alert
z At the “Duty Alert” menu, press “#/Select” key to turn the duty cycle “ON” and press the “ENTER”
key
z Enter the duty pager number and press “ENTER” key.
z Enter the cycle time (in minutes) and press the “ENTER” key.
z Enter the numeric message.
z After setting the duty alert function, press “ENTER”
z Display will show “Duty __ saved”
Multicall Paging System User Manual
8. Out of Range
With this feature, the pagers will play a melody when taken out of range from the transmitter to inform the guest that they are
located “Out of Range” and will miss their page. The melody will only stop, when they return back within range.
Turning the Out of Range “ON”
z Remove all the pagers from the charging unit or unplug the power supply that is connected to the charger base
z At the “Out of Range” menu, press “#/Select” key to turn the Out of Range “ON”
z Press “ENTER” key 3 times. After sending the signal, all the pagers will light up once to tell you that they received
the new message
Turning the Out of Range “OFF”
z Remove all the pagers from the charging unit or unplug the power supply that is connected to the charger base
z At the “Out of Range” menu, press “#/Select” key to turn the Out of Range “OFF”
z Press “ENTER” key 3 times. After sending the signal, all the pagers will light up once to tell you that they received
the new message