IQ CHARGER TRANSMITTER Manual LEE TECHNOLOGY KOREA CO., LTD. email sales@leetek.org website www.leetekorea.com KOREA HEADQUARTER 3 Fl. 499-2, Sang3-dong, rd Wonmi-gu, Bucheon City, US OFFICE 530 Highland Station Drive, Suite 2004, Suwanee, GA 30024, U.S.A.
IQ CHARGER TRANSMITTER User Manual NOTICE This manual, software and electronic circuitry are copyrighted. All rights reserved. Under the copyright laws, this manual, software and electronic circuitry may not be copied, in whole or in part without written prior consent of Lee Technology. All information provided in this document is carefully prepared and offered in good faith as a guide in the installation, use and servicing of our products.
IMPORTANT SAFETY INFORMATION CAUTION: To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be colocated or operation in conjunction with any other antenna or transmitter. Any changes or modifications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
IQ CHARGER TRANSMITTER User Manual INSTRUCTION for IQ CHARGER TRANSMITTER 1. EASY INSTALLATION INSTRUCTION Step X Lock the antenna to the right corner of the IQ CHAGER TRANSMITTER. (Fit over plug and twist left to lock antenna in place) Step Y Plug the IQ CHAGER TRANSMITTER A/C adaptor into the IQ CHAGER TRANSMITTER and then into a standard outlet. A surge protector is recommended. Z Step [ Step If more than one charging base is used, connect base units with jump wires.
IQ CHARGER TRANSMITTER User Manual ◈ Save Mode (Special Option) With this feature, the transmitter can send a signal automatically, when a pager number is stored. z SINGLE MODE - TO SAVE THE NUMBER - >PAGER # + *(MENU) - TO CALL THE PAGER -> SEND -> #+ SNED (WHEN YOU WANT TO CALL THE PAGER IN MIDDLE OF THE SAVE LIST) z - BURST MODE( IT WILL AUTOMETICALLY CALL THE PAGER ON THE SAVE LIST) TO SAVE THE NUMBER ->PAGER #+ SEND 1.
IQ CHARGER TRANSMITTER User Manual 3. Range Test With this feature, you can find out how far your transmitter will cover. z Remove a couple of pagers from the charger base z At the range test menu, press “#/Select” key to turn range test “ON” z Press “ENTER” to start the range test. As soon as range test is activated you’ll notice the pagers flash once per every 10 seconds. 4. Pre Set Message With this feature, you can pre-set message used frequently.
IQ CHARGER TRANSMITTER User Manual 6. Set Pager ID (IQ CHARGER TRANSMITTER Only) With this feature, you can have the option of changing the IDs. To Change the ID (Base, Individual, etc) of your pagers, follow these instructions: z At the “RX Read Mode” menu, press “#/Select” key to scroll through the different options. (1. Base Id, 2. S/N) z After making a selection, press “ENTER” key. Your pagers’ information (Base ID, or S/N) will be displayed on the LED display.
IQ CHARGER TRANSMITTER User Manual 8. Out of Range With this feature, the pagers will play a melody when taken out of range from the transmitter to inform the guest that they are located “Out of Range” and will miss their page. The melody will only stop, when they return back within range.