User's Manual

IQ CHARGER TRANSMITTER User Manual
◈ Save Mode (Special Option)
With this feature, the transmitter can send a signal automatically, when a pager number is
stored.
z SINGLE MODE
- TO SAVE THE NUMBER - >PAGER # + *(MENU)
- TO CALL THE PAGER
-> SEND
-> #+ SNED (WHEN YOU WANT TO CALL THE PAGER IN MIDDLE OF THE SAVE LIST)
z BURST MODE( IT WILL AUTOMETICALLY CALL THE PAGER ON THE SAVE LIST)
- TO SAVE THE NUMBER ->PAGER #+ SEND
1. Set Current Time
With this feature, you can setup current time into the IQ CHAGER TRANSMITTER.
z At the “Set Current Time” menu, set the hour and then press “ENTER” key.
z Set the minutes and press “ENTER” key.
z Use “#/Select” key to select AM or PM
z After the correct time is set, press the “ENTER” or “*/Menu” key to return to the
main menu or press the “CANCEL” key twice to exit the system setting menu.
2. Set Sleep Time
With this feature, you can turn off pagers at once automatically.
To turn this feature OFF
z Press “#/Select” key to turn the feature “OFF”
z Press “ENTER” to go back to the main menu.
To change the sleep time
z Press “#/Select” key to turn the sleep time “ON”
z Set the hour and then press “ENTER” key
z Set the minutes and then press “ENTER” key
z Use the “#/Select” key to select AM or PM
z After suitable time is set, press the “ENTER” or “*/Menu” key to return to the
main menu or press “CANCEL” key twice to exit the system setting menu.