User's Manual

IQ CHARGER TRANSMITTER User Manual
3. Range Test
With this feature, you can find out how far your transmitter will cover.
z Remove a couple of pagers from the charger base
z At the range test menu, press “#/Select” key to turn range test “ON”
z Press “ENTER” to start the range test. As soon as range test is activated you’ll
notice the pagers flash once per every 10 seconds.
4. Pre Set Message
With this feature, you can pre-set message used frequently.
z At the Pre Set message menu, press “#/Select” key to turn Pre Set Message “ON”
or “OFF”
z After Pre Set Message is set, press the “ENTER” or “*/Menu” key to return to the
main menu or press “CANCEL” key twice to exit the system setting menu.
5. Pager Alert
With this feature, you can have the option of changing the way your pagers alert.
Be sure that all pagers are returned before performing this procedure.
To Change the alert mode of your pagers, follow these instructions:
z Remove all the pagers from the charger base or unplug the power supply that is
connected to the charger base.
z At the “Set Pager Alert” menu, press “#/Select” key to scroll through the different
alert options.
z After making a selection, press “ENTER” key 3 times. After sending the message,
the pagers will now respond with your new selected alert mode.
z Return all the pagers to the charger base or plug the power supply. The pagers
are ready to receive the page with its new alert mode.