User's Manual

IQ CHARGER TRANSMITTER User Manual
6. Set Pager ID (IQ CHARGER TRANSMITTER Only)
With this feature, you can have the option of changing the IDs.
To Change the ID (Base, Individual, etc) of your pagers, follow these instructions:
z At the “RX Read Mode” menu, press “#/Select” key to scroll through the different
options. (1. Base Id, 2. S/N)
z After making a selection, press “ENTER” key. Your pagers’ information (Base ID, or
S/N) will be displayed on the LED display.
z At the “RX Read Mode” menu, press “*/Menu” key to scroll through the different
options. (1. Set indivi ID, 2. Set the same ID, 3. Set RX Base ID)
z After making a selection, press “ENTER” key. You are now able to enter the
setting values.
z Press “ENTER” key to complete the setting.
7. Duty Alert
With this feature, you can enable your transmitter to send a page, at a preset time, to a
certain pager to remind them of a duty required of them. For example, a buzzer can
receive a page every 3 minutes to remind him to check the restroom.
You can assign up to 3 different groups to be duty alert pagers.
To program the duty alert
z At the “Duty Alert” menu, press “#/Select” key to turn the duty cycle “ON” and
press the “ENTER” key
z Enter the duty pager number and press “ENTER” key.
z Enter the cycle time (in minutes) and press the “ENTER” key.
z Enter the numeric message.
z After setting the duty alert function, press “ENTER”
z Display will show “Duty __ saved”