We build your success in IoT.
Meet Your LEEDARSON Temperature & Humidity Sensor The Temperature & Humidity Sensor lets you know the ambient temperature and humidity to trigger different actions to make you more comfort. Capabilities: The LEEDARSON Temperature & Humidity Sensor is a universal ZigBee Temperature & Humidity Sensor. The LEEDARSON Temperature & Humidity Sensor detects temperature and humidity. The LEEDARSON Temperature & Humidity Sensor is powered by two CR2032 batteries with 3 years battery life.
Specification Power Supply: Battery Operational Voltage: 3V Battery Type: CR2032*2 Battery Life: 3 years 0~60℃ accuracy: +‐ 1℃ Accuracy ‐10~50 ℃ accuracy: +‐ 1.5 ℃ 0 ~ 100% RH accuracy: +‐ 6% Radio Protocol: ZigBee Radio Frequency: 2.4GHz Range: 100ft LOS Operational Temperature: ‐10Ԩ ~ +50Ԩ Standards Compliance: FCC, CE Dimensions (mm): 84.4(L)*63.4(W)*20.
How to connect a Temperature & Humidity Sensor Use the button at the bottom of the sensor to include the Temperature & Humidity Sensor into the ZigBee network. Temperature & Humidity Sensor’s Inclusion Procedure: 1. Make sure the sensor is powered. 2. Press and hold the button(reset) for 3 second. This will cause a LED indicator to flash once per second. 3. Tap “Add device” in the LEEDARSON LDS App. The LDS App will search for the device. 4.
How to reset a Temperature & Humidity Sensor Reset procedure deletes memory, including all information on the ZigBee network and the hub. Temperature & Humidity Sensor’s Reset Procedure: 1. Make sure the sensor is powered. 2. Press and hold the button for 3 seconds. 3. Release the button. 4. LED indicator flashes once per second to confirm a successful reset. Caution: This device complies with Part 15 of the FCC Rules.
