Quick Start Guide

5. The reference range template of PIR detection is tested at the indoor temperature (the range is 20℃～

25℃)，the target of the test is 77kg±10kg weight and 1.71m±0.3m height, the target of the test across

movement speed is 4m/s±0.15m/s.

6. In order to prevent the PIR sensor’s abnormal fault, please don’t mounting and operating sensor in the

bellow conditions,

Firstly, product mounting should prevent installed in the air flow environment such as in front of the

door, window, heater, air conditioner and so on.

Secondly, the PIR detection area should not be shielded by other screen.

Thirdly, if the operating temperature range is out of the defined range of product specification may result

in some product faults, which is not in the technique commitment of manufacturer.

Fourthly, this product has mot pet immunity function, so when some animals go through in front of the

product may trigger PIR function reported.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES

ACCORDING TO THE INSTRUCTIONS

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20cm between the radiator and

any part of your body.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference. (2) This device must accept any interference received,

including interference that may cause undesired operation.

Caution: The user is cautioned that changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,