4AK1S70EN0 Keypad 1
Home Security beyond the Front Door Ring Video Doorbells began a Ring of Security around your entire property. Ring Protect is the security system that takes the Ring of Security a step further giving you another level of protection for your property. Now, you can arm and disarm your system, prevent crime and protect your home - all from your phone, tablet or PC.
Contents 1. Diagram 2. In-app Setup 3. Connecting the Device 4.
1. Say hello to your Ring Keypad.
Network Number pad Battery Faulted sensors (bypass) LED Ring Security Modes 5
2. S et up your Ring Keypad in the Ring app.
Set up your Ring Keypad near your Base Station In the Ring app, choose Set Up a Device. Choose the Ring Keypad, then tap Add Device.
3. Connect your Ring Keypad to your base station.
Plug the keypad into a wall outlet Connecting the power supply to the keypad and the wall turns on the device. Your base station will find it.
Scan the QR Code or enter the S2 PIN The QR Code and PIN can be found on the back of your device, on the box, or on the card in this box.
Track the connection progress of the keypad Your keypad will try to connect to your base station. The keypad’s LED ring will show the progress.
4. I nstall your Ring Keypad on the wall.
Place your keypad Move your keypad where you’d like it. It should be somewhat near the door you usually use to enter or exit the home. You can place it on a table or mount it using the reversible bracket.
View keypad history in the Ring app You should have a few history events from installing your keypad. Check your app to make sure it’s working.
Security that moves with you Ring Protect has three security modes to match whatever you’re doing. Home No sensors are monitored. Move freely through the house. Away All sensors are monitored. Secure your whole house. Stay Some sensors are monitored. Freedom and security, mixed.
FCC Compliance Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement 15.19 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 15.21 Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.