Item #********** Model #CF2003-W, CF2003-B, CF2003-N ETL Model #CF2003-W, CF2003-B, CF2003-N USE AND CARE GUIDE OSSA 52-INCH SMART CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-877-592-5233 HOMEDEPOT.CA/Hubspace THANK YOU to continually create quality products designed to enhance your home.
Table of Contents 2
Wireless Protocol Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc. Google and Google Play are trademarks of Google LLC. Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser.
Pre-Installation SPECIFICATIONS Size Speed 52 in. 1 2 3 4 5 6 Volts Amps Watts RPM CFM Net Weight Gross Weight 120 0.045 0.070 0.105 0.160 0.260 0.345 2.2 3.5 6.0 9.0 15.5 22 60 80 105 125 155 175 1800 2300 3100 3900 4700 5500 16.53lbs (7.5 kg) 21.38lbs (9.7 kg) Cu. Ft. 1.993 :NOTE These are approximate measures. They do not include the amps and wattage used by the light kit.
Pre-Installation (continued) Part Description Quantity Part I J K L M N A Mounting bracket 1 B Canopy Canopy cover 1 Hanger ball (preassembled) Downrod (preassembled) Coupling cover 1 C D E F G H Fan-motor assembly Light housing assembly 1 1 1 1 O Description LED module Quantity 1 Glass shade 1 Blade 5 1 1 1 1 Remote control receiver Remote control transmitter Remote control holder Extension wire 1 HOMEDEPOT.CA/Hubspace Please contact 1-877-592-5233 for further assistance.
Installation MOUNTING OPTIONS Hanger Bar WARNING: personal inju ry, mount to outlet box marked “A cceptable for fan suppor t of 35 lbs. (15.9 kg) or less”, and use screws provided with the outlet box. An outlet box not be acceptabl e for fan supp ort and may need to be Outlet Box If your ceiling fan does not have an existing UL-listed mounting box, then install one using the following instructions: □ Disconnect the power by removing the fuses or turning off the circuit breakers.
Assembly — Hanging the Fan 1 Install the mounting bracket to the outlet box WARNING: To reduce the risk of fire, electric shock, or other personal injury, mount the fan only to an outlet box or supporting system marked acceptable for fan support and use the mounting screws provided with the outlet box. □ Secure the mounting bracket (A) to the ceiling outlet box with the screwsand washers provided with your outlet box or provided in hardware included .
Assembly - Hanging the Fan (continued) 2 Attaching the downrod to the fan motor assembly □ Loosen the two fan motor assembly coupling set screws (QQ) from the fan motor assembly (G) coupling. □ Remove the hitch pin (PP) and lock pin (OO) from the downrod (E). Remove the hanger ball (D) from the downrod (E) by loosening the hanger ball set screw (NN), and removing the cross pin (MM), then sliding the hanger ball (D) o ffof the downrod (E). □ Carefully feed the fan wires up through the downrod(E).
Assembly - Hanging the Fan (continued) 5 Making the electrical connections WARNING: To avoid possible electrical shock, ensure the electricity is turned off at the circuit breaker or main fuse box before wiring. Figure 5 WARNING: Check to see that all connections are tight, including the ground, and that no bare wire is visible at the wire nuts, except for the ground wire. □ Insert the receiver (L) into the mouting bracket (A ) with the flat side of the receiver (K) facing the ceiling.
Assembly - Hanging the Fan (continued) 6 Securing the fan motor assembly to the mounting bracket □ Loosen two mounting bracket screws (RR) away from the mounting bracket (A) 1/3 length. □ Attach the canopy (B) key shape hole to the mounting bracket (A) screws (RR) previously loosen and clockwise rotate the Canopy. □ Tighten the mounting bracket screws (RR) . □ Align the key shape hole on the canopy (B) with canopy cover (C).
Assembly - Hanging the Fan (continued) 7 Install the blades □ Remove all blade screws from the rotary plate (SS) of fan-motor assembly (G). □ Insert the blades (K) into holes of the rotary plate (SS) in place. □ Reattach all blade screws through the blade washers and tighten all screws to make sure the blades (K) is secure. : NOTE The blade with "this side up" label must face upwards, otherwise it cannot be installed correctly. SS SS Figure 9 Figure 10 11 HOMEDEPOT.
Assembly - Hanging the Fan (continued) 8 9 Install the light housing □ Remove one screw from the connect plate (P) of fan-motor □ □ □ □ assembly (G). And loosen other 2pcs screws away from 3/4 length. Locate the key hole of light housing(H). Place two key holes on the mounting screw loosened on the connect plate (P). Reattach 1pc screw through light housing (H) in place to the connect plate (P). Tighten 3pcs screws until light housing (H) is secure.
Assembly - Hanging the Fan (continued) 10 11 Install the glass shade Install the remote bracket Install scenarios 1: Direct to Wall via screws and dry wall anchors □ Rotate the glass shade (G) clockwise until it is secure. □ □ □ □ Using the remote bracket plate 2 as a guide, mark the two holes locations. Drill the two holes at the marked locations and install two anchors (II) in each of the marked locations. Insert screw (LL) into anchor and tighten each screw.
Remote Operation :NOTE Wait for the fan to stop before reversing the direction of the blade rotation. Warm weather 433 Remote control Your fan is equipped with a remote contol to operate the speed and lights for your new ceiling fan. effect. This allows you to set yo ur air conditioner on a warmer setting without affecting your comfort. the ceiling. This allows you to set your heating unit on a cooler setting without affecting your comfort.
Remote Operation Icon Button Name Action 6 Speed LED Press different buttons will light up different quantity of indicators All ON/OFF Short press to turn Fan and light on/off Fan ON/OFF Light ON/OFF Fan Speed Notes Short press to turn fan on/off Long press for 5 seconds to reset factory default setting Short press to turn light on/off The brightness and CCT will be the same as your last setting when Long press for 5 seconds to initiate turned on. pairing process The default fan speed is level 6.
Smart Setup Operation 1 Download the Hubspace™ app from the App Store or the Google Play Store. 2 Create an account to sign in or log in if you already have an account. 4 Tap the ‘+’ button in the upper right corner to add your ceiling fan. For more information on the Hubspace app, visit hubspace.ca/Hubspace. 3 Connect your ceiling fan to power and follow the instructions on the app screen. NOTE: □ This Hubspace device requires a 2.4GHz Wi-Fi channel.
Voice Commands T he Ossa 52 in. LED Indoor Smart Color Changing Ceiling Fan works with Alexa a nd Google Assistant. This section list s some of the voice comm ands you can use. To view these and other commands, go to http://hub spaceconnect.ca Google Alexa When you want to... Ask Alexa to...urn on the fan only. When you want to... Ask Google to...urn on the fan only. T … tur n on fan p ower. T … tu rn on fan p ower. Turn off the fan only.
Troubleshooting Problem Solution The fan will not start. 1. Check to make sure the wall switch is in the on position if applicable. 2. Check the main and branch circuit fuses or breakers. 3. Make sure your device is connected to a power source. 4. Check the battery in the remote control, the transmitter and receiver are matched. The fan is noisy. 1. Make sure the fan was not damaged prior to installation. 2. Ensure the screws that attach the fan blade bracket to the motor hub are tight. 3.
Troubleshooting Problem Solution My Hubspace device is not connecting to Wi-Fi. Make sure your device is connected to a power source. Your Internet connection or Wi-Fi network may be down. My device cannot nd any Wi-Fi networks. Make sure you have a 2.4GHz capable Wi-Fi network within range of the device you are trying to add. My device is in a location that does not have Wi-Fi. Can I still use it with the Hubspace app? Yes. Use the app on a phone with an Internet connection like LTE.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-592-5233 HOMEDEPOT.CA/Hubspace Retain this manual for future use.
